Rolling Blackouts: What They Are and How Long They Last

What rolling blackouts and load shedding are, why grid operators order them, how long they last, whether there's a schedule, and how to prepare.

Last updated November 14, 2026

A rolling blackout, also called a rotating outage, controlled outage or load shedding, is when the grid operator orders utilities to cut power to blocks of customers in turn because demand for electricity has outrun the supply, usually in extreme heat or cold. It's a last resort, ordered at the highest level of a grid emergency, to keep the whole grid from collapsing. Each block is usually out for about an hour or two before power moves to the next: PG&E says one to two hours, Southern California Edison about one hour. There is often little or no warning, and in a severe shortage, such as Texas in February 2021, utilities may be unable to rotate, leaving some customers out for days.

What is a rolling blackout?

When the grid can't produce enough power for everyone using it, the operator cuts demand instead. In Texas, ERCOT tells each utility how many megawatts to shed, and the utility switches off circuits in rotating blocks, so no one area stays dark for long. ERCOT calls these controlled outages and says they are also known as load shed; the federal report on February 2021 notes that manual load shed is often called rolling or rotating blackouts.

Rolling blackouts are not the same as demand response or load management programs, in which customers have agreed in advance to have their power cut or reduced in an emergency. ERCOT uses those at EEA 2, before it orders outages.

Why do rolling blackouts happen?

ERCOT lists the conditions that can leave too little supply: generators breaking down unexpectedly, overloaded transmission lines, wind and solar output far below normal, and extreme heat or cold driving demand well beyond the ordinary. If it didn't shed load, ERCOT says, the imbalance could black out the entire Texas grid, which could take many days or even weeks to recover from.

How does a grid emergency lead to rolling blackouts?

First the grid operator asks the public to conserve. If reserves keep falling, it declares an Energy Emergency Alert (EEA). ERCOT's three levels, from its 2026 overview:

LevelWhenWhat happens
EEA 1Reserves below 2,500 MW and not expected to recover within 30 minutesMore generation is brought online, including imports from neighboring grids
EEA 2Reserves below 2,000 MW, or frequency below 59.91 Hz for 15 minutesPublic asked to conserve; demand response programs and voltage reduction
EEA 3Reserves below 1,500 MW, or frequency below 59.8 HzUtilities ordered to make controlled outages, affecting homes and businesses

California works the same way: the California Independent System Operator (CAISO) orders rotating outages during an EEA 3, when it can't meet its minimum reserves and cutting load is imminent or under way. Southern California Edison notes that it doesn't call rotating outages itself; state law requires it to carry them out when CAISO declares an EEA 3.

How long do rolling blackouts last?

Utility or gridEach rotation
PG&E (California)Typically one to two hours
Southern California EdisonAbout one hour
ERCOT (Texas), smaller transmission operatorsTarget of 10 to 30 minutes
ERCOT (Texas), larger transmission operators60 minutes or more
Austin EnergyTypically up to 40 minutes

These are targets. Austin Energy warns that, depending on grid conditions, outages may not be able to rotate and can turn into extended outages.

Is there a rolling blackout schedule for my area?

Not a fixed one. The grid operator sets the amount of power to cut, and each utility decides where. ERCOT gives each utility a share based on its historic peak demand, and says it has no oversight into the utilities' outage plans.

Some utilities let you look up your place in line ahead of time:

  • Southern California Edison prints each customer's rotating outage group on the front of the paper bill, and its outage map shows where each group falls in the order.
  • PG&E lets you look up any address in its Outage Center when CAISO calls rotating outages, and notes that start times are estimates, not schedules.

Find your electric company and its outage map.

Will I get a warning?

Often not much. Southern California Edison says it may have less than 10 minutes before it must begin, not enough time to notify customers individually. PG&E says it may not be able to give advance warning, and announces rotating outages through local media, social media and phone calls. In Texas, ERCOT's TXANS alerts, by email or text, report when conservation is requested and when the grid enters an emergency.

Who is spared from rolling blackouts?

ERCOT says hospitals, police and fire stations, nursing homes, and critical water, wastewater and gas facilities are generally prioritized, but they can still lose power in a deep or long event. If someone in your home relies on medical equipment, ERCOT advises registering with your utility before you need to, and having a backup plan. See medical baseline and priority restoration.

Have there been rolling blackouts in the US?

They're rare. ERCOT has ordered controlled outages four times since it was established: in 1989, 2006, 2011 and February 2021, when it shed 20,000 MW, five times the 2011 amount.

February 2021, Texas. The report by FERC, NERC and regional staff calls it the largest controlled load shed in US history. More than 4.5 million people in Texas lost power, some for as long as four days, and at least 210 people died. Because the shortage was so large and so long, some utilities could not rotate their outages, and the same customers stayed without power for hours or even days.

August 2020, California. CAISO ordered rotating outages on August 14 and 15 during an extreme heat wave, affecting about 491,600 customers of the state's three large investor-owned utilities on August 14 and 321,000 on August 15. Customers were out from 8 to 150 minutes, depending on the day and utility. PG&E had less than 10 minutes' notice and had to switch circuits by hand, so its outages ran longer. The state's root cause analysis found no single cause, but three factors: the heat wave, resource planning that hadn't kept pace with demand in the early evening, and market practices.

How do I prepare for a rolling blackout?

  • Conserve when asked. PG&E says that if enough people conserve at once, rotating outages can be canceled or postponed by an hour or more.
  • Keep a power bank or portable charger ready, and flashlights for everyone, as Ready.gov advises.
  • Turn off appliances and electronics when the power goes out, and leave one light on so you know when it's back, as Southern California Edison advises.
  • Treat dark traffic lights as four-way stops, SCE adds.
  • Keep the fridge and freezer closed. See what to do during a power outage.

A rolling blackout is also different from a wildfire Public Safety Power Shutoff: PG&E notes that rotating outages called by CAISO are not shutoffs. See Public Safety Power Shutoff vs rolling blackout.

More on outages

Frequently asked questions

Is there a rolling blackout schedule for my area?
Not a fixed one. When a grid emergency comes, the grid operator sets how much power to cut and each utility decides where, announcing it through its outage map, alerts and local media. Some utilities, such as Southern California Edison, print your rotating outage group on your bill.
What is the difference between load shedding and a rolling blackout?
They are the same thing: the grid operator orders utilities to cut power to some customers so demand doesn't exceed supply, and utilities rotate the outages between blocks so no area stays dark for long. Load management is different: it's a program in which customers have agreed in advance to have their power cut or reduced in an emergency.
Why do utilities cut power on purpose?
When generators fail, transmission is limited or extreme heat or cold drives demand too high, the grid can run short of power. Controlled outages are a last resort: ERCOT says that without them, the whole Texas grid could black out and take days or weeks to recover.
How long do rolling blackouts last?
Usually about an hour or two per area: PG&E says one to two hours and Southern California Edison about one hour, while Texas utilities target anywhere from 10 minutes to an hour or more. In a severe shortage, such as Texas in February 2021, some customers stayed out for hours or days because outages couldn't be rotated.

Sources: ERCOT: 2026 Energy Emergency Alert overview, ERCOT: using load shed to address shortages in generation supply, ERCOT: TXANS alerts, FERC, NERC and Regional Entity staff: The February 2021 Cold Weather Outages in Texas and the South Central United States, CAISO, CPUC and CEC: Final Root Cause Analysis, Mid-August 2020 Extreme Heat Wave, PG&E: rotating outages, Southern California Edison: what is a rotating outage, Austin Energy: outage causes and Ready.gov: power outages. This is general information, not medical, legal or emergency advice; in a life-threatening emergency, call 911.